NEC DT930 Series User Manual page 53

1.
2
DTMF Tone.
(4) Select
Select an item by one of the following operations.
❍
Highlight an item by using
or OK.
❍ 2
Press .
0
Automatic,
(5) Select
(see the following table).
, and press
1
Disable or Enable
2
Select an item by one of the following operations.
❍
Highlight an item by using
OK.
❍
Press
,
Menu Items
Follow the system settings. If no setting is
0 Automatic made in the system, the default setting
(DTMF=ON) is applied.
1 Disable Follow the terminal settings (OFF).
2 Enable Follow the terminal settings (ON).
For the setting on the system, contact the System
TIP
Administrator.
TIP
Default setting is Automatic.
TIP
The enabled item is highlighted.
39
, and press
or OK.
0 2
- , and press
Description
or