To Restore The Settings Data Of The Terminal - NEC DT930 Series User Manual

1.
(19) Press Soft key (Exec).
The backup is started.
(20) Press Soft key (Exec).
The display returns to the (Backup/Restore
screen).
When the backup process fails, "Upload Failed",
is displayed on the LCD. Check the following
points and retry backup.
Check Points
Check if the IP address/
Address (URI) of FTP/
TFTP/HTTPS server is
correct or not.
Verify the power to FTP/
TFTP/HTTPS server and
network equipment is ON
or OFF.
Verify the LAN cable is
securely connected.
If the upload continues to fail, it may be a failure
in the terminal. Contact the system administrator
for details.
For conditions other than those described above,
if "Download Failed" or "Upload Failed" is
displayed, contact the system administrator.
Actions
Set the proper IP address/
address (URI) of FTP/TFTP/
HTTPS server.
Turn the power ON.
Reconnect the cable if required.
(21) After the data backup completes, the display
changes to the following:

To Restore the Settings Data of the Terminal

(1) Display the Menu screen, select Settings.
3
Data Backup/Restore.
(2) Select
4
Protocol.
(3) Select
(4) Choose a protocol used by the server which
stores the backup file.
(5) According to the selection in [Protocol] screen,
proceed with the following steps below.
1
FTP is selected, continue with
If
STEP 6.
2
TFTP is selected, proceed to
If
STEP 12.
3
HTTPS is selected, proceed to
If
STEP 6.
5
Account Settings.
(6) Select
1
User ID.
(7) Select
104