NEC DT930 Series User Manual page 59

1.
2
Local Volume.
(4) Select
Select an item by one of the following operations.
❍
Highlight an item by using
or OK.
❍ 2
Press .
, and press ,
45
(5) Make a selection from the following list.
Select an item by one of the following operations.
❍
Highlight an item by using
OK.
0 2
❍
Press -
Menu Items
0 Automatic Each volume level is displayed on LCD.
1 Disable Each volume level is not displayed on LCD.
2 Enable Each volume level is displayed on LCD.
Note: When 0 Automatic is set, the default setting (Enable)
is applied.
TIP
Default setting is Automatic.
TIP
The enabled item is highlighted.
, and press
or OK.
, and press
Description
or