1.
Setup with Menu Key
Enable/Disable Off-Hook Ringing
The procedure below shows how to enable/disable Off-
hook ringing.
(1) Display the Menu screen, select Settings.
1
User Settings.
(2) Select
Select an item by one of the following operations.
❍
Highlight an item by using
or OK.
1
❍
Press
.
1
Incoming Call.
(3) Select
Select an item by one of the following operations.
❍
Highlight an item by using
or OK.
❍
1
Press
.
1
Offhook Ring.
(4) Select
Select an item by one of the following operations.
❍
Highlight an item by using
or OK.
1
❍
Press
.
(5) To disable/enable the off-hook ringing, choose
1
2
Disable or
Enable.
Select an item by one of the following operations.
❍
Highlight an item by using
OK.
❍
1
2
Press
or
, and press
, and press
, and press
, and press
or OK.
, and press
TIP
Default setting is Enabled.
TIP
The enabled item is highlighted.
To Set Ringing of Headset
The procedure below shows how to enable/disable the
ringing of headset.
This feature is required for both terminals and
system settings during initial installation. For
details, contact the system administrator.
,
(1) Display the Menu screen, select Settings.
1
(2) Select
1
(3) Select
2
(4) Select
(5) To disable/enable the ringing of headset, choose
,
1
Disable or
Tone Type 1 – Tone Type 8:
In the preview function, each ringer tone sounds
continuously. However, when "
selected, each ringer pattern of internal and
external incoming calls is set by the initial system
settings. For details, contact the system
,
administrator.
When selecting "
function is not supported. Use the Feature key
to enable this function.
or
90
User Settings.
Incoming Call.
Headset Ring.
2
Enable.
0
0
Automatic", the preview
Automatic" is