Transport - Landoll Tilloll 875 Series Operator's Manual

OPERATION AND MAINTENANCE

Transport

1. Raise the unit to full transport height.
2. Fold the wings.
IMPORTANT
When folding or unfolding wings, operate tractor
engine at a slow idle on 15'F units and a fast idle on
18', 21', 25'-6" units, and hold hydraulic valve on
tractor open to assure smooth operation.
3. Place the transport lock brackets on the rods of the
lift cylinders on the main frame and pin in place (See
Figure 4-3.)
LOCKOUT CYLINDER
WELDMENT
HYDRAULIC
CYLINDER
trans_lock p2
Figure 4-3: Frame Lift Cylinders
4-4
Failure to use transport lock pins during
transport may result in permanent equipment
damage, serious injury, or death.
IMPORTANT
When transporting farm implements on public roads,
it is the responsibility of the operator to abide by
state and local laws concerning wide load, speeds,
and safety lighting equipment. The slow moving
vehicle sign can be attached to the implement when
necessary.
LOCKOUT
PIN
HAIR
PIN

WARNING
F-60-0111 Edition