Table of Contents
Advertisement
5.6.
Power Supply
After install the device correctly following above steps, the device can be
powered on.
ON status of PWR indicator light means the system has been powered on.
All the indicator lights on front panel of ON status means the system is
self-checking and initializing.
After self-check and initialization, the device starts to operate, and then the SYS
light is flicking which means that system operates normally. Indicator lights of the 24
Ethernet ports indicate the status of ports (ON or OFF is according to port
configuration and connection).
If the CONSOLE port is connected to PC and terminal software is configured
correctly before system powered on, there will be user management interface on the
PC screen, and then operation is available. (Specific operations are available in
software configuration guide)
Raisecom Technology Co., Ltd
16
Advertisement
Table of Contents
