Yaesu FTM-300DR Advance Manual page 7

3. Press the DIAL knob to save the setting.
• When registering the DP-ID is complete, the display returns to the DP-ID list
screen.
• If not registering a DP-ID, rotate the DIAL knob to select "CANCEL" then press
the DIAL knob.
• If registering several DP-IDs, repeat step 2 and 3.
• A maximum of 24 stations may be registered.
4. Press the [DISP] key or the PTT, to save the setting and return to normal operation.
• All the other communicating stations should similarly register the DP-IDs to the
DP-ID lists of their transceivers.
• The DP-ID setting is complete.
To communicate using the DP-ID function, register the DP-ID of each other's transceiver on
both transceivers. By registering the DP-ID, users may communicate even if the Digital group
ID (DG-ID) is a different setting.
DP-ID list
Station B DP-ID "bbbbb"
DP-ID: aaaaa
DG-ID: TX01 RX01
Station A and station C do not register
each other's transceiver DP-ID on
their transceivers. However, they may
communicate because the same
DG-ID is set on both transceivers.
The transceivers may communicate
even if the Digital Group ID (DG-ID) is
a different setting because Station A
and station B have registered each
other's DP-IDs on both transceivers.
A
C
DP-ID: ccccc
DG-ID: TX01 RX01
B
DP-ID: bbbbb
DG-ID: TX02 RX02
Station B may not receive station C
because station B has not registered the
DP-ID of station C.
However, station C may receive station
B because station C has registered the
DP-ID of station B.
DP-ID list
Station B DP-ID "bbbbb"
7
DP-ID list
Station A DP-ID "aaaaa"