Voice Announcement Of The Operating Frequency - Yaesu FTM-300DR Advance Manual

Voice announcement of the operating frequency

(1) When the voice announcement is set to
The frequency of the operating band will be automatically announced in the following
cases:
• When the VFO mode and memory mode are switched.
• When the operating band is changed.
• The frequency will also be announced when pressing the [F(SETUP)] key  [FVS-2] 
[VOICE GUIDE].
• The volume announcement voice is linked to the volume of the operation band.
(2) When the voice announcement is set to "MANUAL"
1. Press the [F(SETUP)] key  [FVS-2]
2. Rotate the DIAL knob to select [VOICE GUIDE], then press the DIAL knob.
The frequency of the operating band will be announced.
The volume of the announcement voice is linked to the volume of the operation band.
29