Styles And Installation Of Temposonics ® R-Series V Rh5 - MTS Sensors Temposonics V R Series Operation Manual

R-Series V EtherCAT
Temposonics
®
Operation Manual
4.3 Styles and installation of Temposonics
RH5-M/S-A/-V – RH5 with threaded flange M18×1.5-6g or ¾"-16 UNF-3A (connection type D58)
MS/ER
NS/RN
b
Threaded flange a
»M«
A/F 46
»S«
A/F 44.5 (1.75) 51.3 (2.02)
RH5-T-A/-V – RH5 with threaded, raised face flange ¾"-16 UNF-3A (connection type D58)
MS/ER
NS/RN
51.3
(2.02)
Mechanical option »B«: Bushing on rod end for threaded flange
M18×1.5-6g or ¾"×16 UNF-3A
Ø 10
(Ø 0.39)
* Stroke length > 5000 mm (196.9 in.)
Controlling design dimensions are in millimeters and measurements in ( ) are in inches
Fig. 6: Temposonics RH5 with ring magnet, part 1
®
®
R-Series V RH5
®
Sensor electronics housing
17 68
(0.67) (2.68)
b
53 (2.09)
Sensor electronics housing
17
65.5
(0.67)
(2.58)
Dead zone
63.5/66* 8
(0.31)
(2.5/2.6*)
3 22 15
(0.12) (0.87) (0.59)
Null zone Stroke length
51 25...7620
(2.01) (1...300)
Threaded flange »M«: M18×1.5-6g
25
Threaded flange »S«: ¾"-16 UNF-3A
(0.98)
Null zone Stroke length
51 25...7620
(2.01) (1...300)
2.5
(0.1)
Threaded flange »T«: ¾"-16 UNF-3A
25
(0.98)
Mechanical option »M«: Thread M4 at rod end for threaded
flange M18×1.5-6g or ¾"×16 UNF-3A
* Stroke length > 5000 mm (196.9 in.)
I 10 I
Dead zone
63.5/66*
(2.5/2.6*)
* Stroke length > 5000 mm (196.9 in.)
Dead zone
63.5/66*
(2.5/2.6*)
* Stroke length > 5000 mm (196.9 in.)
Dead zone
70/72.5*
Thread M4
(2.76/2.85*)
3.5 6
(0.14) (0.24)