Daikin MicroTech Operation And Maintenance page 67

Menu Name Minimum Password to Read
(Menu Index) (None, User, Manager, Technician)
Set|Unit
InFanSel:
CompType:
SplitSysSel:
ValveType:
WtrPipes:
FBDmprEn:
ElHtStgs:
EconSel:
BypassTime:
EmergHtEn:
EmergHtSpt:
MnPmpOnTime:
EmrgHtShtDnEn:
Set|SensorInstall
SpcTmpSens:
CondOFlwSn:
OATSens:
LWTSens:
InHumSens:
OutHumSens:
RATSens:
HiPrsBIAvl:
InCoilTSen:
OutCoilTSn:
EWTSens:
CO2RstSens:
FrzStatBIAvl:
ExhILkBiCf:
DmpEnd1Avl:
DmpEnd2Avl:
BLessEHAvl:
VLckOutAvl:
UnOccAvl:
ShutDnAvl:
DehumAvl:
RstVoltSens:
Set|Setpoints
KeySptOffset:
OccClSpt:
OccHtSpt:
UnoccClSpt:
UnoccHtSpt:
StdbyClSpt:
StdbyHtSpt:
OccDiff:
UnoccDiff:
SptMeth:
CntrlTmpSel:
KeySptOfstSel:
Set|IndoorFan
FanChgsPerHr:
FanOffDel:
FanCycling:
FanOnInUnocc:
FanCntrlMeth:
BrkptAutoLow:
BrkptAutoMed:
BrkptAutoHigh:
BrkptAutoDiff:
PWMLow:
PWMMed:
PWMHigh:
RstMnFan:
RstMxFan:
www.DaikinApplied.com
Minimum Password to Write
(None, User, Manager, Technician)
"RO" if Read Only
N
N
N
N
N
N
N
N
N
N
N
N
N
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Appendix – Local User Interface (LUI)
Help Text
T Indoor fan select.
T Compressor type.
T Split or non-split system.
T Valve type.
T Select 2 pipe or 4 pipe.
T Face and bypass damper enable.
T Specifies number of elect heat stages.
T Select outdoor enthalpy calc strategy.
M Local bypass time.
T Emergency Heat Enable.
T Emergency Heat Setpoint.
T Min pump on time before comp can turn on.
T Dly after powerup before comp turn on.
T Space temp sensor.
T Condenser overflow sensor.
T Outside air temp sensor.
T Leaving water temp sensor.
T Indoor humidity sensor.
T Outdoor humidity sensor.
T Return air temp sensor.
RO High pressure binary input avail.
RO Indoor coil temp sensor.
RO Outdoor coil temp sensor.
RO Entering water temp sensor.
RO CO2 sensor installed.
RO Freeze stat binary input avail.
RO Exhaust Interlock binary input configured.
RO Damper End 1 binary input configured.
RO Damper End 2 binary input configured.
RO Boilerless EH binary input configured.
RO Vent Lockout binary input configured.
RO Unoccupied binary input configured.
RO Shutdown binary input configured.
RO Dehumid binary input configured.
RO Reset volts sensor.
U Setpoint offset adjust.
U Occupied cooling setpoint.
U Occupied heating setpoint.
U Unoccupied cooling setpoint.
U Unoccupied heating setpoint.
U Bypass cooling setpoint.
U Bypass heating setpoint.
M Occ, bypass & standby setpt diff.
M Unocc setpt diff.
U Setpt calculation method.
M Space or RAT for control temp.
U Keypad setpoint offset select.
M Allowed fan changes per hour.
T Indoor fan off delay.
M Continuous or cycling in occ mode.
M Indoor fan runs in unoccupied mode.
T Method controlling indoor fan.
M Speed transition for low fan.
M Speed transition for medium fan.
M Speed transition for high fan.
M Speed transition differential.
M PWM_3Fixed low fan speed.
M PWM_3Fixed medium fan speed.
M PWM_3Fixed high fan speed.
M Min fan when controlled by reset.
M Max fan when controlled by reset.
67 OM 1280-2 • MICROTECH UNIT CONTROLLER