Entering Password
1. Select correct password from (Table 5).
HOME
2. Press
button
ENTER
3. Press
button twice. "00000" will be displayed.
4. Use the ▲ key to change the numeric value and use the
ENTER
button to advance to the right one character.
a. EXAMPLE – Enter Technician Password (06897)
ENTER
b. Press
to accept "0"
c. Press ▲ 6 times to change value from "0" to "6".
ENTER
d. Press
to accept and shift to next digit.
e. Press ▲ 8 times to change value from "0" to "8".
ENTER
f. Press
to accept and shift to next digit.
NOTE: If previous value is incorrect or changed use the
BACK
button to revise previously entered value.
Change with ▲ ▼ ARROWS and use
accept.
www.DaikinApplied.com
NOTE: Password must be re-entered if the unit is power
ENTER
to
7
g. Press ▲ 9 times to change value from "0" to "9".
ENTER
h. Press
to accept and shift to next digit.
i. Press ▲ 7 times to change value from "0" to "7".
ENTER
j. Press
. Password will be accepted and
"PWLevel" will display as "Tech".
cycled or the password times out, whichever occurs
first.
Only use the ▲ to change the values of the
password. ▼ will result in incorrect values.
OM 1280-2 • MICROTECH UNIT CONTROLLER
Getting Started