8.2
Use WPS to connect to the wireless network
You can connect wireless devices (e.g. smart phones) to the wireless network of the router easily
and quickly with WPS.
Wireless devices (e.g. smart phone) are also required to support WPS function if you hope to connect
to the WiFi in this way.
Method 1: Use the WPS button
Procedures for using WPS button for WPS connection:
Press the WPS button on the bottom panel of the router and release it. The WIFI indicator
Step 1
blinks green.
Enable
WPS function on your wireless device within 2 minutes to perform WPS
Step 2
negotiation and connect to the wireless network.
‐‐‐End
Method 2: Use PBC
Procedures for using PBC for WPS connection:
Start a web browser on the device connected to the router, and visit 192.168.0.1.
Step 1
Choose WiFi > WPS.
Step 2
Tick Enable.
Step 3
Set Configure Method to PBC.
Step 4
Click Apply.
Step 5
Enable the WPS function on your wireless device
Step 6
negotiation and connect to the wireless network.
‐‐‐End
When the pop‐up window with WPS connect success appears, the wireless device is connected to
the wireless network.
ithin 2 minutes to perform WPS
w
34