5.2.2
Insert a SIM card into the router for internet access
If you are setting up the router in factory settings, please refer to the Quick setup part to access
the internet with a SIM card. Otherwise, you can follow the steps below to switch to LAN mode
and access the internet with a SIM card.
Procedures for switching to LAN mode:
Start a web browser on the device connected to the router, and visit 192.168.0.1.
Step 1
Choose WAN > Connection Setting.
Step 2
Select LAN Mode.
Step 3
Click Apply.
Step 4
Pull out the Ethernet cable connected to the modem.
Step 5
Press the POWER ON/OFF button to power off the router.
Step 6
Insert a SIM card and press down the POWER ON/OFF button.
Step 7
Wait a few seconds. When the INTERNET indicator blinks blue or green, and the Signal
Strength LED indicator lights green (1 to 4 bars), the router is connected to the internet
successfully.
‐‐‐End
You can access the internet with a computer connected to the port 1, or wireless devices
connected to the router's wireless network.
The network typology of accessing the internet using a SIM card is shown below:
When the INTERNET indicator lights solid red:
Check if the SIM card is inserted correctly or locked. To unlock the SIM card, please see Unlock and
lock a SIM card.
If you have obtained APN parameters from your ISP, you can refer to APN setting to manually
create an APN profile and connect to the internet.
14