Click Add.
Step 3
Enter the IP address of the virtual server, which is 192.168.0.150 in this example.
Step 4
Define a Private Port and Global Port, which are both 9999 in this example.
Step 5
Select a Protocol, and click Apply.
Step 6
If you want to modify the present rule, click the corresponding parameter and modify it. Click OK and
Apply to enable it.
‐‐‐End
After the settings, users from the internet can access the virtual server by visit the address in a
web browser "Intranet service layer protocol name://the present WAN IP address of the
router:global port".
For example, when the WAN IP address of the router is 102.33.66.88, set the private port to 9999
and Global port to 9999, you can visit "http:// 102.33.66.88:9999" to access the visual server.
44