Apn Setting - Tenda 4G680 User Manual

5.3 APN setting
When a SIM card is inserted, the router can automatically detect the profile information. When
you have obtained APN parameters or in need of joining a specific network, you can manually add
a new APN profile and connect to it.
Parameter
Profile ID
Name
APN
User
Password
PDP Type
Authentification
Preference
Procedures for adding a new APN profile:
Start a web browser on the device connected to the router, and visit 192.168.0.1.
Step 1
Choose WAN > APN Setting.
Step 2
Choose Profile List, click the dropdown box, and choose Add New.
Step 3
Fill the required parameters, and click Set Connect.
Step 4
Click Apply.
Step 5
‐‐‐End
Description
It specifies the ID of the new profile created.
It specifies the name of the operator or network provider.
It specifies the connection type of the router to the network.
It specifies the user name and password used for joining the network.
It specifies the types of communication protocol. Available options are IPV4, IPV6 and
IPV4/IPV6. IPV4/IPV6 is recommended.
It specifies the authentication protocols for network connection. Available options are
PAP, CHAP and PAP/CHAP. PAP/CHAP is recommended.
15