Tenda 4G680 User Manual page 18

Choose WAN > Connection Setting, and select WAN Mode.
3.
Click Apply.
4.
Click WAN Settings, and choose a desired WAN Connection Type and enter required
5.
parameters accordingly.
Click Apply in the WAN Settings page.
6.
‐‐‐End
The configuration succeeds when Complete is displayed in the pop‐up window, and you can access
the internet through the modem.
Parameter
WAN Connection Type
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Host Name
Description
The router provides three connection types: STATIC, DHCP and PPPoE. Choose one
according to your need.

STATIC: Use the fixed IP address and related parameters provided by your ISP to
access the internet.

DHCP: Use dynamic IP address provided by your ISP to access the internet.

PPPoE: Use the account and password provided by your ISP to access the
internet.
Under STATIC mode, you need to enter these fixed IP Address information provided
by your ISP.
It specifies the name of the router recognized by your ISP.
11