View Disk And S.m.a.r.t. Information - Speco HRLN User Manual

DVR User Manual
Record & Disk Management
There are four disk groups. By using disk groups, you can correspond the camera to a disk (the recording data of the camera in the group will be
stored into the disks in the same group). ADVR with e-SATA interface supports e-SATA recording.
The added disks and cameras will be added into group one automatically. All disks and cameras in the groups can be deleted except group one
(select a disk group and then click on the top right corner of the added disk or camera to delete it from the group). The deleted disks and
cameras will be moved into group one automatically.
Each group can add the disks and cameras from other groups. Each disk and camera can only be added into one group. Select a disk group and then
click in the disk or camera row to pop up a window. Check the disks or cameras in the window and then click "Add".
Some models may support a "Backup Group". If your device doesn't support this function, please skip the following instructions.
You can add the important channels into the backup group to avoid data loss.
Select "BK Group" and then click to add a disk as the backup disk. An authentication box will pop up. After entering the login username
and password, click "Format Now" to select the backup disk. The added backup disk will be formatted and this disk will be removed from the
normal group. Then add cameras to the backup group. These cameras can be added to a normal group and the backup group simultaneously.

7.5.3 View Disk and S.M.A.R.T. Information

Click StartSettingsDiskView Disk Information to view the HDD information; click "S.M.A.R.T. Information" to view the working status of the
HDD. Refer to the picture below.
42