MIMAKI UCJV300 Series Operation Manual page 37

l Checking the LAN connection
1
Check the display on this product.
• Local guidance can be used for checking.
"Displaying Machine Information (Local Guidance)"(P. 31)
• Printing is not possible if "100Mbps", "10Mbps", or "No Connect" is displayed. Event email can be
used.
"Event Email Function Settings"(P. 119)
2
Check the lamp on the LAN connector.
• The LAN connector lamp illuminates when this machine is running.
Color Status
Green Illuminated
Off
Orange Illuminated
Flashing
Off
Network Connection Precautions
Make sure the network is set up as follows: Printing is not possible if the network is not set up correctly.
• Use a Category 6 or higher LAN cable.
• Use a 1000BASE-T compatible computer or switching hub. Printing requires 1000BASE-T support.
• The PC used to transfer print data must be located on the same network as this product. This product
cannot be connected via a router.
l Direct connection to the product
l Connection via a switching hub
INFORMATION
LAN Status 1000Mbps
Connected via 1000BASE-T
Connected via a network other than 1000BASE-T
• 1,000 Mbps is not supported if only the orange lamp is illuminated or flashing.
Check the specifications for the PC, peripheral devices, and cable.
Linked up (connected).
Data being received
Link down (not connected)
Switching hub
37
Chapter 1 Before Using This Product
Description
1