Cutting Menu; Cutting Menu List; Chapter 6 Maintenance - MIMAKI UCJV300 Series Operation Manual

Chapter 5 Settings

5.6 Cutting Menu

You can set various settings related to cutting functions.
l Cutting Menu Screen
LOCAL
TEST PRINT
MENU
CLEANING
Cutting
TP DETECT
CUT MODE
COPY
TOOL CHANGE
SETUP SUB MENU
<<

Cutting Menu List

Item
TP DETECT
Detection
Shape Type 1/Type
2/Zero Margin
Size
OFFSET X -5.00 to 5.00
OFFSET Y -5.00 to 5.00
MENU
Cutting
width:1340mm
<<
REMOTE
Cutting
MAINTENANCE
>
NORMAL
>
>
>
>>
<<
*1
Setting
- Enter the conditions of the printed register marks.
ON/OFF Set this to ON to cut cutting data with register marks.
Select three types of register mark shapes.
"Register marks"(P. 98)
5 to 40 mm Set the register mark length (B).
Line width
Register mark length (B)
"Standards for Register Mark Length and Line Width"(P. 99)
Change the position of the register mark origin. If the cut position
mm shifts in the same direction, change the position of the origin.
mm
Plus Y direction
• If "ERROR 37 MARK ORG" is displayed, change the layout by referring
to the following.
"Reading Range of Register Marks"(P. 100)
>
>>
>
>>
Details
Mark: Type 1 Mark: Type 2
Plus X direction
Origin
Origin
Plus Y direction
124
Plus X direction