MIMAKI UCJV300 Series Operation Manual page 164

Chapter 7 Troubleshooting
• Wear safety glasses, gloves, and a mask when handling ink, maintenance cleaning solution,
waste ink, or other solutions used with this machine. Leaking ink may adhere to the skin or get
into your eyes or mouth.
1
In LOCAL mode, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
2
Select "AIR PG", then press the [ENTER] key.
3
Select the checkbox corresponding to the head to be air-purged. (This does not apply to the
UCJV150 Series.)
• The checked head becomes the air purge target.
• With the 300 Series, you can simultaneously select Head 1 and Head 2.
Ink set
4-color
6 colors + W
4 colors + CL + W
4 colors + W
4
Press the [ENTER] key.
• The target head moves over the wiper.
5
Open the front cover.
6
Open the lid on the front of the carriage.
• Remove the screw, then slowly lower the lid.
Head 1
C M Y
C M Y
C M Y
C C M
Lid Screw
164
Head 2
K Y K
K Lm Lc
K CL CL
M Y K
M C
W W
W W
W W