Part Names And Functions; Front - MIMAKI UCJV300 Series Operation Manual

Chapter 1 Before Using This Product

1.1 Part Names and Functions

Front

14
13
12
11
10
No. Name
1 Platen
2 Pinch rollers
Grid rollers
3 Capping station
4 Carriage
5 Operating panel
6 Clamp lever (front)
7 Waste ink tank
8 Take-up unit
9 Maintenance covers
10 Cutter unit
11 Ink IC chip slot
12 Ink status lamp
1
9
8
Print area. "Platen"(P. 25)
The pinch rollers and grid rollers are used to grip and feed the media.
"Pinch Rollers and Grid Rollers"(P. 26)
Includes caps, wipers, and an NCU for monitoring print head nozzle
conditions. "Capping Station"(P. 25)
Consists of a print head, a UV-LED lamp, and the jam sensor.
"Carriage"(P. 25)
Includes operating keys and displays indicating various settings and other
items. "Operating Panel"(P. 29)
Lowering the clamp lever secures the media. Raising the clamp lever
releases the media.
Container for waste ink.
Automatically rolls up the roll media after printing.
Open the cover to perform maintenance. Printing and automatic
maintenance are not possible while the covers are open.
Includes a media cutter cutting the media along the platen cutting slot. The
cutter unit is located at the maintenance position on the left side during
standby. "Installing Cutting Tools"(P. 82)
The ink IC chip provided with the Ink bottle is inserted here. This manages
information on the Ink bottle.
This lamp indicates ink status.
22
2
3
5
4
Summary
"Waste Ink Tank Replacement"(P. 155)
"Insert Ink IC Chip"(P. 43)
"Ink status lamp"(P. 26)
6
7
"Take-up Unit"(P. 27)