Operational; General; Control Panel - Fluidwell F Series Manual

Level monitor with high/low level alarms

Hide thumbs Also See for F Series:

Table of Contents

Page 6

OPERATIONAL

2.1.

 The F073-T may only be operated by personnel who are authorized and trained by the

operator of the facility. All instructions in this manual are to be observed.

 Take careful notice of the " Safety rules, instructions and precautionary measures " in

the front of this manual.

This chapter describes the daily use of the F073-T. This instruction is meant for users / operators.

2.2.

The following keys are available:

Functions of the keys

This key is used to program and save new values or settings.

It is also used to gain access to SETUP-level; please read chapter 3.

This key is used to SELECT the level alarm values.

The arrow-key  is used to increase a value after PROG has been pressed

or to configure the unit; please read chapter 3.

The arrow-key is used to select a digit after PROG has been pressed or to

configure the unit; please read chapter 3.

Fig. 2: Control Panel.

HF073TEN_v0403_05 Atex_IECEx_CSA_FM

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the F Series and is the answer not in the manual?

F073-t