Changing The Three-Digit Display Position - IBM R/S6000 7012 300 Series Operator's Manual

Changing the Three-Digit Display Position

You can change the three-digit display position so that it can easily be read when the system
unit is in the vertical or horizontal position.
There is a hinged lens over the three-digit display.
Note: In the following figures, the three 7-segment characters appear lit to help in
understanding the position of the three-digit display.
To change the display with the system unit in the horizontal position and the three-digit
display in the vertical position, do the following:
1. To open, push down on the top of the hinged lens.
Character Holder
Character Holder
2. Grasp the character holder with your fingertips.
3. Turn the holder 90 in a counterclockwise direction.
Three-Digit Display
Three-Digit Display
I
O
Three-Digit Display
Hinged Lens (Open)
Three-Digit Display
I
O
(Vertical Position with
Hinged Lens Closed)
l l
O O
1.44
(Vertical Position with
Hinged Lens Closed)
1.44
(Vertical Position)
l
O
1.44
(Vertical Position)
1.44
Changing the System Unit Position
7-7