Diagnostic Load Progress Indicators - IBM R/S6000 7012 300 Series Operator's Manual

943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
964
968
970
971
972
973
974
975
977
981
984
985
986
987
989
990
991
994
995
996
997
998
999
D81

Diagnostic Load Progress Indicators

Note: When a lowercase c is listed, it displays in the lower half of the seven-segment
character position.
c00
c01
c02
Progress indicator. 3480 and 3490 control units attached to a System/370
Channel Emulator/A adapter are being identified or configured.
100MB ATM adapter being identified or configured.
1.0GB SCSI differential disk drive being identified or configured.
Serial port 3 adapter is being identified or configured.
Progress indicator. A 730MB SCSI disk drive is being configured.
Portable disk drive being identified or configured.
Unknown direct bus-attach device being identified or configured.
Missing SCSI device being identified or configured.
670MB SCSI disk drive being identified or configured.
355MB SCSI disk drive being identified or configured.
320MB SCSI disk drive being identified or configured.
400MB SCSI disk drive being identified or configured.
857MB SCSI disk drive being identified or configured.
670MB SCSI disk drive electronics card being identified or configured.
120MB DBA disk drive being identified or configured.
160 MB DBA disk drive being identified or configured.
160MB SCSI disk drive being identified or configured.
1.37GB SCSI disk drive being identified or configured.
Internal 20GB 8mm tape drive identified or configured.
1.0GB SCSI disk drive being identified or configured.
Half-inch, 9-track tape drive being identified or configured.
150MB 1/4-inch tape drive being identified or configured.
2.3GB 8 mm SCSI tape drive being identified or configured.
Other SCSI tape drive being identified or configured.
CD-ROM drive being identified or configured.
Progress indicator. An optical disk drive is being identified or configured.
M-Audio Capture and Playback Adapter being identified or configured.
540MB SCSI-2 single-ended disk drive being identified or configured.
1GB 8–bit disk drive being identified or configured.
M-Video Capture Adapter being identified or configured.
2.4GB SCSI disk drive being identified or configured.
Progress indicator. Enhanced SCSI CD-ROM drive is being identified or
configured.
200MB SCSI disk drive being identified or configured.
2.0GB SCSI-2 single-ended disk drive being identified or configured.
525MB 1/4-inch cartridge tape drive being identified or configured.
5GB 8 mm tape drive being identified or configured.
1.2GB 1/4 inch cartridge tape drive being identified or configured.
Progress indicator. Single-port, multi-protocol communications adapter is
being identified or configured.
FDDI adapter being identified or configured.
2.0GB4 mm tape drive being identified or configured.
7137 or 3514 Disk Array Subsystem being configured.
T2 Ethernet Adapter being configured.
AIX Install/Maintenance loaded successfully.
Insert the first diagnostic diskette.
Diskettes inserted out of sequence.
Three-Digit Display Numbers
B-11