IBM R/S6000 7012 300 Series Operator's Manual page 103

Step 12
(From Step 10)
1. If the terminal type has not been defined, you must use the Initialize Terminal
option on the FUNCTION SELECTION menu to initialize the operating system
environment before you can continue with the diagnostics. This is a separate and
different operation than selecting the console display.
2. Select Diagnostic Routines.
3. Press the Enter key.
4. In the table on the following page, find the menu or system response you received when
you selected Diagnostic Routines; then follow the instructions given in the Action
column.
6-8
Operator Guide