Thermo Scientific
Figure 18. Fuse holder and fuses
Fuse holder
3. Remove the old fuses and replace them with the new fuses provided in the accessory kit
(Table 5
on
page
26).
4. Push the fuse holder back into the back panel of the detector until you hear a clicking
sound.
5. Plug the power cord into the power receptacle on the back panel of the detector.
6. Turn the power on by pushing in the power switch on the front panel.
Fuses
Lever
3
Routine Maintenance
Replacing the Fuses
Fuse holder
Accela RI Detector Hardware Manual
27