Siemens HB 56 M 550 Operating And Fitting Instructions Manual page 104

Main oven
Installation
104
4.
Unscrew the clips on the right and left and
remove them (Fig. C).
Remove the panel.
Clean the glass panels with glass cleaner and a soft
cloth.
Make sure that the message „Right above" is upside
down at the bottom left of both panels.
1.
Push the glass panel back at an angle. (Fig. D).
2.
Fit the clips and screw them in again. (Fig E).
3.
Push the top panel back in. Make sure that the
smooth surface is facing outwards.
4.
Replace the cover and screw it back on.
5.
Refit the oven door.
The oven must not be used again until the panels
have been correctly installed.