Supplying Oil - SunStar KM-1957-7 User Manual

4-6. Supplying oil

·Plug in only after oil supply is finished. If the operator mistakenly steps on the pedal with the plug in,
the machine will start automatically and can cause severe injuries.
·When handling lubricants, wear protective glasses or gloves to prevent lubricants from contacting with
your eyes or skin. Wash your hands in running water with soap when they are smeared with
lubricant. If lubricant is in the eye, instantly wash it with running water and see a doctor.
Notice
·Never drink lubricants since they can cause vomiting or diarrhoea. Go to see a doctor, if you
mistakenly drink lubricant.
·Keep the oil out of the reach of children. Keep the oil away from heat.
·Operate the machine only after supplying oil when the machine is used for the first time or has been left unused for a long time.
·Only use genuine lubricant of this company. (Lubricant is in the accessory box.)
1. Supply oil at the oil hole of each friction part and red-marked hole before operating the sewing machine as shown in figure 17.
[ Figure 17 ]
17