4. Control box
1) As in the Figure, attach control box ① to the lower part
of table with four bolts ②.
5. Pedal switch and connecting rod
1) Attach pedal switch ① to pedal switch bracket ② with
four bolts ③.
2) As in the Figure, attach pedal switch bracket ② to the
lower part of table.
3) Connect one end of the connecting rod ④ with pedal
switch and the other end with pedal, and then adjust
length of the rod.
6. Program Unit
1) As in the Figure, combine program unit ① to bracket ③
with three screws ②.
2) Attach the combined bracket③ to the table with four
screw④.
14
①
③
②
①
④
④
②
③
②
[ Figure 9 ]
[ Figure 10 ]
①
[ Figure 11 ]