Oil Supply; 1) Regular Check List; 3) Oil Supplying Method - SunStar SPS/D-BR1254H User Manual

5.12) Oil Supply

Caution

5.12.1) Regular Check List

1) For the parts which need regular check, conduct cleaning and lubrication and add grease to maintain high machine
performance.
2) Test the tension of each driving belt.
3) Without regular machine check, the following problems might result:
－ Abnormal abrasion of the moving parts in a wet condition due to the insufficient oil supply and grease injection
－ Abnormal operation due to dust or foreign materials gathered at the moving parts
Caution
5.12.2) Oil Supply
1) Type of Lubricant
No.
1
2

5.12.3) Oil Supplying Method

1) Arm
－ Check the remaining oil volume at the oil tank
installed at the arm before supplying oil.
－ Fill up the oil tank through the oil outlet at the
upper arm.
36
1) During machine check or maintenance, please observe the safety rules on machine and
electricity.
2) Make sure that the power is "off" before maintenance work begins.
1) If machine damage or mal-operation occurs due to the failure to clean and lubricate the machine
through regular checking, SunStar will not be held liable.
2) Adjust the cleaning cycle depending on the use conditions and environment.
Type of Lubricant
S/M Oil
Silicon Oil
Parts Applied
Arm, Bed, Hook
Silicon Oil Supply Tank