Supplying Oil - SunStar KM-2300 User Manual

4) The standard height is 10mm. Maximum height is 15mm.

4-3. Supplying oil

[ Caution ]
·Plug in only after oil supply is finished. If the operator mistakenly steps on the pedal with the plug in, the machine will start
automatically and can cause severe injuries.
·When handling lubricants, wear protective glasses or gloves to prevent lubricants from contacting with your eyes or skin.
Wash your hands in running water with soap when they are smeared with lubricant. If lubricant is in the eye, instantly wash
it with running water and see a doctor.
·Never drink lubricants since they can cause vomiting or diarrhoea. Go to see a doctor, if you mistakenly drink lubricant.
·Keep the oil out of the reach of children. Keep the oil away from heat.
·Operate the machine only after supplying oil when the machine is used for the first time or has been left unused for a long time.
·Only use genuine lubricant of this company. (Lubricant is in the accessory box.)
1. Turn over sewing machine, seperates oil holes ② and rubber
cap. Use the oil can ① inthe accessory box to supply
lubricant into the oil holes②.
※ Make sure not to pour the whole lubricant.
Pour oil to Max position of lubrication tank③.
③
Standard 10 mm
(Max. 15mm)
[ Figure 16 ]
①
②
[ Figure 17 ]
15