Unpacking And Hardware Orientation; Unpacking The System - Maico easyScreen Operation Manual

4 Unpacking and Hardware Orientation

This section provides information on:
▪

unpacking the system

▪
becoming familiar with the hardware inclusive connections
▪
system assembly
▪
using the label printer
▪
how to power the easyScreen
▪
how to store the device
4.1 Unpacking the System
Check Box and Contents for Damage
• It is recommended that you unpack your easyScreen carefully making sure that
all components are removed from the packing materials.
• Verify that all components are included as shown on the packing slip included
with your shipment.
• If any component is missing, contact your distributor immediately to report the
shortage.
• If any component appears to be damaged in shipment, contact your distributor
immediately to report it. Do not attempt to use any component or device that
appears to be damaged.
Reporting Imperfections
Notify the carrier immediately if any mechanical damage is noted. This will insure that
a proper claim is made. Save all packaging material so the claim adjuster can inspect
it as well.
Report Immediately any Faults
Any missing part or malfunction should be reported immediately to the supplier of the
device together with the invoice, serial number, and a detailed report of the problem.
Keep Packaging for Future Shipment
Save all the original packing material and the shipping container so the device can be
properly packed if it needs to be returned for service or calibration (see section 3.2).
8508935 Rev. 4
Operation Manual easyScreen
26 04/04/2019