Entering Or Choosing A Patient For Testing - Maico easyScreen Operation Manual

New Patient
Select New Patient to enter demographics for a new patient. After entry of the patient's
information you can save the name to the database for screening later or immediately
proceed with the screening.
Select Patient
Select Patient
to review detailed demographic and test information for this patient or to begin a
screening.
Quick Test
Select QuickTest
information. Quick tests performed in a session are saved temporarily under the patient
name of Quick Test. Later if you want to save a Quick Test session you can save it by
editing the Patient Information.
Change Screener
The Change Screener
disabled. Select Change Screener
the list for selection of a new screener.
Setup
Select Setup
easyScreen. Some settings can only be made via use of the HearSIM
application.

5.7 Entering or Choosing a Patient for Testing

Adding a New Patient
Patient information can be entered manually into the easyScreen via the Enter Details
screen. Select the New Patient
In the Enter Details screen, select a field for data entry by touching the desired field.
The appropriate data entry control such as the keyboard, calendar or drop-down list
will open. Enter the patient's data for the field. Select another field and enter the data
until all desired fields are completed. The Patient ID field must be completed in order
to save the data or proceed to a screening.
It is possible to configure the device to input an automatic ID number into this field so
that you do not have to enter an ID. This ID can be overwritten when entering the
patient data. Configuring easyScreen to use an automatically entered ID number is
accomplished via the HearSIM PC application (Figure 49 and Figure 50).
8508935 Rev. 4
Operation Manual easyScreen
to review the list of patients saved on the device. Select a patient
to proceed immediately to perform a test without entry of patient
control will be unavailable for selection if user login is
to access a list of the device settings that can be made directly on
button on the Home screen.
to log out the current screener and display
44
TM
PC
04/04/2019