General Precautions; Electrical And Electrostatic Safety - Maico easyScreen Operation Manual

2.5 General Precautions

WARNING
WARNING
WARNING
WARNING

2.6 Electrical and Electrostatic Safety

WARNING
In Case of Emergency
8508935 Rev. 4
Operation Manual easyScreen
Before starting a measurement make sure, that the device
works properly.
Use and store the device indoors only. For operation,
storage and transport conditions see table in section 6.
Do not drop or otherwise cause undue impact to this device.
If the device is dropped or otherwise damaged, return it to
the manufacturer for repair and/or calibration. Do not use the
device if any damage is suspected.
Equipment is not user repairable. Repairs must be
performed by a qualified service representative only. No
modifications of the equipment are allowed by anyone other
than a qualified MAICO representative. Modification of the
equipment could be hazardous.
No parts of the equipment can be serviced or maintained
while in use with the patient.
Use of accessories, transducers and cables other than
those specified or provided by the manufacturer of this
equipment could result in increased electromagnetic
emissions or decreased electromagnetic immunity of this
equipment and result in improper operation. The list of
accessories, transducers and cables can be found in the
EMC appendix of this instruction.
For OAE: This icon indicates that patient applied parts of the
device conform to IEC 60601-1 Type B requirements.
For ABR: This icon indicates that patient applied parts of the
device conform to IEC 60601-1 Type BF requirements.
The system is internally powered.
In case of emergency, disconnect the device from the
computer.
13 04/04/2019