Getting Started; Pc System Requirements; Unpacking And Inspection - Maico easyTymp Operation Manual

4

Getting Started

4.1 PC System Requirements

Processor:
Memory:
Graphic display:
Operating system:
Connection:
4.1.1 Supported Software
Measuring module:
Patient Management Software:

4.2 Unpacking and Inspection

Check the packaging and content for damage.
Prior to shipping, the easyTymp was carefully packed and inspected. However, it is good
practice to thoroughly inspect the outside of the shipping box for signs of damage. If any
damage is noted, please notify the carrier immediately.
Please remove the MAICO instrument from the shipping box by lifting the cardboard
package on the end flaps. Holding the package securely, fold the side flaps upwards to
loosen the tension in the plastic film. The instrument can now be easily removed from the
plastic packaging without the use of scissors or other sharp tools.
NOTE: Save all the original packaging material and the shipping container so the
instrument can be properly packed if it needs to be returned for service or calibration.
Notify the carrier immediately if any mechanical damage is noted. This will insure that a
proper claim is made. Save all packing material so the claim adjuster can inspect it as
well. Notify your dealer or MAICO when the adjuster has completed the inspection.
Please check that all accessories listed on the next page have been received in good
condition. If any accessories are missing or damaged, immediately notify your dealer or
MAICO.
8111254 Rev. 7.0
Operation Manual easyTymp
Intel Dual Core 1,8 GHz
2 GB RAM
1280 x 1024 (optimal), mind. 1024 x 768
Windows 7, Windows 8.1, Professional or Ultimate Version for
32 und 64 Bit Computer
.NET-Framework 3.5
free USB port
USB 1.1 or higher
MAICO Impedance Software
MAICO Database, GDT (Germany), NOAH 3, NOAH 4
12 02/16