Certificates And Approvals - Siemens SIMATIC IOT2050 Operating Instructions Manual

Certificates and approvals

NOTICE
The approvals are voided if certain modifications are made
The device approvals are voided if the following modifications are made:
• An Arduino shield or a Mini PCIe card was installed.
• The enclosure was physically modified, for example, openings were created to make
• Cables are routed from the inside out of the device or from the outside into the device,
The device meets the guidelines listed in the following sections.
EU Declaration of Conformity
The associated declaration of conformity is available on the Internet at the following address:
AUTOHOTSPOT.
ISO 9001 certificate
The Siemens quality management system for all production processes (development,
production and sales) meets the requirements of GB/T 19001-2008/ISO 9001:2015, ISO
14001:2015 + Cor. 1:2009 and BS OHSAS 18001:2007.
Certificate registration no.01 100 1430201, 01 104 1430201 and 01 113 1430201.
Software license agreements
If the device is supplied with preinstalled software, you must observe the corresponding
license agreements.
UL approval
The following approvals are available for the device:
● Underwriters Laboratories (UL) in accordance with standard UL61010-2-201
(IND.CONT.EQ), File E472609
● Canadian National Standard CSA-C22.2 No. 61010-2-201
42
LEDs on a plug-in card in the device visible.
for example, to connect sensors or displays.
Operating Instructions, 03/2020, A5E39456816-AA
7
SIMATIC IOT2050