Wall Mounting; Vertical Wall Mounting - Siemens SIMATIC IOT2050 Operating Instructions Manual

Installing and connecting the device
3.2 Mounting the device
3.2.3

Wall mounting

3.2.3.1

Vertical wall mounting

The device is suitable for horizontal or vertical wall mounting.
Note
The device must be installed on the plate of an enclosure.
Requirement
● Two mounting brackets
● Two screws
● T8 screwdriver
Procedure for mounting
1. Lay the mounting brackets on the rear of the device.
2. Fasten the brackets with supplied screws.
3. Mark the bore holes, drill the required holes in the wall and fasten the device to the wall
using two screws.
22
Operating Instructions, 03/2020, A5E39456816-AA
SIMATIC IOT2050