Preface - Siemens SIMATIC IOT2050 Operating Instructions Manual

Preface

These operating instructions contain all the information you need for commissioning and
operation of a device in the SIMATIC IOT2000 family.
It is intended both for programming and testing personnel who commission the device and
connect it with other units (automation systems, programming devices), as well as for service
and maintenance personnel who install add-ons or carry out fault/error analyses.
Basic knowledge requirements
Knowledge of personal computers, operating systems and programming is required to
understand this manual. General knowledge in the field automation control engineering is
recommended.
Scope of validity of this document
These operating instructions apply to the IOT2050 devices of the device family SIMATIC
IOT2000.
● 6ES7647-0BA00-0YA2
● 6ES7647-0BA00-1YA2
Scope of this documentation
The device documentation comprises:
● Product information, for example, "Important notes on your device"
● Quick Install Guide SIMATIC IOT2050
● SIMATIC IOT2050 operating instructions in German, English and Chinese
Conventions
The following generic terms are used in this documentation:
Generic term
Device
Arduino shield
Figures
This manual contains figures of the described devices. The supplied device may differ in
some details from the figures. Within some of the figures, one device is used to represent all
devices.
SIMATIC IOT2050
Operating Instructions, 03/2020, A5E39456816-AA
Specific name
IOT2050 device
ARDUINO UNO (Rev3)
3