Appendix; Certificates And Approvals; A.1 Certificates And Approvals - Siemens SIMATIC PN/M-Bus LINK Operating Instructions Manual

Appendix

A.1

Certificates and approvals

Note
The specified approvals apply only when the corresponding mark is printed on the product.
You can check which of the following approvals have been granted for your product by the
markings on the type plate.
CE marking
The SIMATIC PN/M-Bus LINK device fulfills the requirements and protection objectives of
the following EC directives.
EMC Directive 2014/30/EU
The product is designed for use in the following areas:
● Residential areas in accordance with EN 61000-6-3
● Industrial area according to EN 61131-2 (programmable controllers)
EMC requirements:
Field of application
Residential area
Industrial area
The product meets these requirements if you adhere to the installation guidelines and safety
instructions described in these operating instructions and in the System Manual for the
S7-1200 Automation System
(https://support.industry.siemens.com/cs/ww/en/view/109741593).
PN/M-Bus LINK
Operating Instructions, 03/2018, A5E44260928-AA
Noise emission requirements
EN 61000-6-3
EN 61000-6-4
Interference immunity requirements
--
EN 61000-6-2
A
54