ProLights SUPERFLOWER DMX led User Manual page 19

3.3 Operation without DMX controller
If the light effect unit does not receive any DMX control signal and music is played at sufficient volume with
a clear rhythm in the bass range, the light effect unit, controlled via the microphone, will change patterns to
the rhythm of the music. The led SOUND will flash each time the pattern is changed by sound. If the music
control should fail to operate optimally, increase the volume or reduce the distance between the sound
source and the light effect unit. The patterns projected depend on the show programme selected. In some
programmes, the patterns will change automatically even without music.
To select the SHOW programme:
1. Press the button MENU (5) so many times until
2. Press the button (7). The current programme will be displayed.
3. Use the button UP or DOWN to select the desired show programme:
0...12 (12) (SUPERFLOWER is a 13 programme).
4. To memorize, press the button ENTER.
3.4 Linking
Several units can be interconnected in order to control all further slave units to the same rhythm via the
microphone of the master unit.
5. Connect the DMX OUT (11) of the master unit via a 3-pole XLR cable to the DMX IN (10) of the first slave unit.
6. Connect the DMX OUT of the first slave unit to the DMX IN of the second slave unit, etc.
7. As soon as the control signals from the master unit are present at the slave units, their red LED SLAVE
(4) will constantly light up. The movements of the slave units may be in sync with the master unit or be
exactly opposite to it (e. g. if only one slave unit is used).
a) To switch between movement in sync and opposite movement, set the second unit as SLAVE MODE.
b) Press the button MENU, and with rotary wheel choose SLAVE MODE.
c) )Select:
"SL 1" - SLAVE MODE "normal";
"SL 2"- SLAVE MODE "2 light show" .
To switch between "normal" for movement in sync and "2 light show" for opposite movement.
d) To memorize, press the button ENTER. If the button ENTER is not actuated for 8 seconds, the unit will
return to its previous adjustment.
e) Press the button MENU to exit.
SUPERFLOWER
(Show Mode) is displayed.
... ( ) = Programme
7