Configuring An Ip Converter - Sony NU-NM11B System Integration Manual

The IP converters are registered in [Virtual Device List].
Note
Register IP converters mounted on trolleys in the same
way.
Tip
After registering IP converters, click [Back] to return to the
[Workgroup Selection] screen.
Activating a workgroup
A workgroup must be activated in order to configure an IP
converter.
To activate a workgroup, click [...] beside the [Default
Workgroup] button on the [Workgroup Selection] screen,
and select [Activate] from the displayed menu.
The [Activate Workgroup Confirmation] screen appears.
Click [OK] without changing the checkbox setting. The
workgroup is activated.
32
Step 4: Installing an IP Converter
To disable a workgroup, click [...] beside the [Default
Workgroup] button, and select [Deactivate] to deactivate
the workgroup.

Configuring an IP Converter

Configure the various settings of an IP converter using
Network System Manager.
After checking the basic operation described in "Basic IP
Converter Configuration Operations" (page 33), perform
the following initialization for all IP converters.
IP converter configuration flow
Initializing 1) Set a name.
2) Set the IP address.
3) Set the system frequency.
Set the IP converter connection type
(source/destination)
r
Settings 1) Enable/disable the optical fiber cable
according to the redundancy function.
operation mode 2) Enable 4K uncompressed
transmission.
3) Set the video format manually.
r
Configuring 1) Down-convert function
other items 2) Video interface
r
Set the sync mode.
Initializing
a Set a name.
Set the names of the IP converter.
For details about configuration, see "Setting the name"
(page 35).
b Set the IP address.
Set IP address of the IP converter.
For details about configuration, see "Setting IP
addresses" (page 35).
c Set the system frequency.
Set the system frequency to 25 Hz or 29.97 Hz. Set the
IP converters in all ORs to the same system frequency.
For details about configuration, see "Setting the system
frequency" (page 36).