Sony NU-NM11B System Integration Manual page 71

2
Select the Network GenLock group in which a fault has occurred on the [Network GenLock Group List] screen, and
click the [Assign Followers] button.
The [Assign Virtual Follower Network GenLock Module] dialog appears.
3
Select the IP converter on which a fault has occurred, and click the [Delete] button.
The selected IP converter is deleted from the [Virtual Follower Network GenLock Module List].
4
Select a new IP converter in the [GenLock Module List], and click
The new IP converter is registered in the [Virtual Follower Network GenLock Module List].
5
Click the [Close] button.
6
Click the [Apply] button.
.
Replacement Procedures when IP Converter Fault Occurs
71