Recovering From A Backup - Sony NU-NM11B System Integration Manual

6
Select the backup destination hard disk in [Backup
destination], and click the [Next] button.
A warning message appears.
7
Click the [OK] button.
8
Check the settings, and click the [Backup] button.
56
Step 9: Creating Backup Data
9
When [Status: Completed] appears in the [Backup
Once Wizard] dialog, click the [Close] button.

Recovering from a Backup

This section describes how to perform a bare metal
recovery after replacing a hard disk, using a full backup
saved on a hard disk.
Use the following procedure to perform a bare metal
recovery.
Note
The screen display will vary depending on the usage
environment.
1
Start the server from the Windows Server 2012
installation DVD, and click the [Next] button.