Sony NU-NM11B System Integration Manual page 41

The [Assign Virtual Leader Network GenLock
Module] dialog appears.
4
Select an IP converter to act as the GenLock leader,
and click the [Assign] button.
5
Click the [Save] button.
The Network GenLock group is registered.
6
Select the registered Network GenLock group, and
click the [Assign Followers] button.
The [Assign Virtual Follower Network GenLock
Module] dialog appears.
7
Turn the checkboxes on for all IP converters displayed
in [GenLock Module List], and click the
The IP converters are registered in [Virtual Follower
Network GenLock Module List].
8
Click the [Close] button.
9
Click the [Apply] button.
10
Activate the workgroup (see page 32).
Note
When sharing trolley devices between ORs, the IP address
of the Network GenLock leader and the PTP domain
number of the Network GenLock group must be the same
as for the OR.
button.
Step 4: Installing an IP Converter
41