Table of Contents
Advertisement
IP addresses
Set the IP addresses according to the following table. In safety priority or uncompressed transmission priority operation
mode, assign unique main and sub IP addresses.
The network addresses are as follows.
Main: 192.168.10.0/24
Sub: 192.168.11.0/24
Set the host addresses as described in the following table.
Host address
1 to 9
10
11
12 to 20
21 to 70
71 to 120
121 to 220
221
222 to 250
251 to 254
Tips
• In cost priority mode, the same network switch IP address must be configured for two VLANs (OR1 and OR2). The
network switch IP address is set to the following values by loading a switch setup file.
OR1: 192.168.10.254
OR2: 192.168.10.253
• After the overall system structure has been determined, it is recommended that you prepare a list of the IP address
assignments for each device as an aid when installing devices.
Notes
• If connecting to a network other than an OR, takes precautions to provide network security.
• Do not connect to the Internet. To connect to the Internet, contact your Sony sales representative.
Description
IP addresses for OR controllers and NSM API clients. These addresses are user configurable.
Reserved for future functions.
IP address for the NSM server.
Reserved for future functions.
IP addresses for IP converters on trolleys (up to 50 addresses).
As a trolley is moved from one OR to the next, the IP converter must be assigned a different IP
address for connection with each OR.
IP addresses for fixed IP converters (up to 50 addresses).
As a fixed IP converter does not move from one OR to the next, the IP converter may be assigned
the same IP address as an IP converter in another OR.
IP addresses for DHCP assignment when initializing IP converters (up to 100 addresses).
IP address for connection of a PC or other device by a system administrator for performing system
analysis.
Reserved for future functions.
IP address for the network switch.
Step 2: Installing a Network Switch
17
Advertisement
Table of Contents
