Sony NU-NM11B System Integration Manual page 46

9
Click the [Close] button.
Configuring the design of the monitoring
screen
Use the following procedure to set the layout of the
network switch and devices to display on the monitoring
screen.
1
Click [Settings] > [Network Topology Layout].
The [Network Topology Layout] screen appears.
2
Click the [Create] button.
The topology diagram appears.
3
Select the layout method in [Layout].
[Column] is selected for this example.
46
Step 6: Configuring the Routing and Monitoring Screens
The layout of the topology diagram is updated.
4
Click the [Save] button.
5
Click the [Monitoring] button.
The monitoring screen appears.
Check that the topology diagram has the layout
specified on the [Network Topology Layout] screen.