Heatscope MHS-SM1600 Original Installation And Instruction Manual page 20

M U N I C H H O M E S Y S T E M S
All surfaces should be cleaned using a damp cloth only. Never use cleaning products containing alkaline
substances such as sodium hydroxide or soap, surfactants or solvents such as alcohol.
Use only a very soft cloth or a brush for the reflector and the heating elements.
removal from service / disposal
AU
When the unit reaches the end of its life, it must be removed from service by a specialist in accordance
with the relevant regulations and steps must be taken to ensure that it cannot be put into use again.
The unit must be disposed of professionally and in an environmentally friendly manner. The relevant legal
regulations must be observed.
Guarantee and warranty
The HEATSCOPE is guaranteed for 24 months. The warranty period begins on the date on which the new
®
unit was purchased. Expendable parts or defects that affect the usability of the unit only slightly are not
covered by the guarantee. When making a guarantee claim, you must provide the original invoice showing
the date of purchase and the unit model.
Processing of guarantee claims
Please contact your dealer/distributor before returning the defective unit along with valid proof of
purchase and a detailed description of the fault. Please note: Don't send in any devices to the manu-
facturer without any former contact with your distributor or dealer. He will inform you about all follwoing
steps. the manufacturer will only accept the unit, if it is returned with adequate transport packaging
which protects it securely during transport.
The manufacturer will, at its own discretion, fulfil its warranty obligations by either repairing or exchanging
the faulty unit or individual parts of the faulty unit. If a unit is replaced, the shape and colour of the
new unit may vary slightly from the original one. The original date of purchase shall determine when the
guarantee period begins. The guarantee period shall not be extended if the unit was replaced or repaired
by the manufacturer.
Warranty exclusions
Damage or defects caused by improper handling or operation as well as defects caused by using non-
original parts or the use of accessories not recommended by the manufacturer are not covered by the
warranty.
The warranty does not cover damage caused by external influences such as fire, lightning or any trans-
port damages. Liability for consequential damages to persons or property is excluded.
If the serial number of the unit has been changed, removed or defaced, the warranty will be invalid.
All warranty claims shall be forfeited if the unit is opened, altered, modified, rebuilt or repaired by a per-
son not authorized by the manufacturer.
The declaration of conformity (CE, WEEE, RoHS) is available upon request from the manufacturer.
MAD Design Australia Pty Ltd · Showrooms 3 & 4, 40-42 O'Riordan St · Alexandria NSW 2015 Australia