Table of Contents
Advertisement
Note
If the watch does not indicate the
●
correct time even if it is able to connect
with a phone, adjust the hand and day
indicator positions.
Adjusting Hand and Day Indicator
l
Alignment
If there is a World Time City specified
●
with the CASIO WATCHES phone
app, its time will also be adjusted
automatically.
Auto time adjustment is performed at
●
the times described below.
After your phone's time zone or
ー
summer time setting is changed
After 24 hours or more have passed
ー
since the last time adjustment using
Bluetooth connection
After 24 hours or more have passed
ー
since city swapping using CASIO
WATCHES or watch operation
After 24 hours or more have passed
ー
since the last home city change or
time adjustment using watch
operation
Watch operation can be performed
●
even while it is connected with your
phone.
Triggering Immediate Time Adjustment
●
The watch's time setting will be adjusted
automatically whenever you establish a
connection between the watch and a phone.
Whenever you want to trigger immediate time
adjustment, perform the procedure below to
connect with a phone.
1.
Move the phone close to (within one meter
of) the watch.
2. X
Enter the Calendar Mode.
Navigating Between Modes
l
3. X
Hold down (B) for at least 0.5 seconds
until the second hand points to [C].
Release the button as soon as the second
hand points to [C].
When the watch connects with a phone,
the second hand will normally move to
[Y(YES)] and then the watch's time setting
will be adjusted.
Operation Guide 5625
Configuring World Time
Settings
Specifying a World Time City with CASIO
WATCHES causes the watch's World Time
City to change accordingly. The standard
time/summer time setting of the World Time
will be adjusted automatically without any
watch operation required by you.
Enter the Calendar Mode and then press
●
(B). Next, check to make sure that the
second hand is pointing to [Y(YES)].
If the second hand is not pointing to
●
[Y(YES)], refer to the information at the link
below.
Connecting with a Phone
l
Note
The CASIO WATCHES phone app
●
World Time lets you select from among
approximately 300 cities as the World
Time City.
To select a World Time City
●
1. Y
Tap the "CASIO WATCHES" icon.
2. Y
Perform the operation shown on the
phone screen. The World Time setting will
be reflected on the watch.
You can determine whether a World
●
Time is a.m. or p.m. by checking the
position of the small 24-hour hand.
World Time hour and minute
World Time hour (24-hour)
Configuring the Summer Time Setting
●
1. Y
Tap the "CASIO WATCHES" icon.
2. Y
Perform the operation shown on the
phone screen to select a summer time
setting.
"Auto"
●
The watch switches between standard
time and summer time automatically.
"OFF"
●
The watch always indicates standard
time.
"ON"
●
The watch always indicates summer
time.
Note
While the summer time setting is
●
"Auto", the watch will switch between
standard time and summer time
automatically. You do not need to
switch between standard time and
summer time manually. Even if you are
in an area that does not observe
summer time, you can leave the
watch's summer time setting as "Auto".
Changing the time setting manually
●
with a watch operation will cancel auto
standard time/summer time switching.
CASIO WATCHES screen shows
●
information about summer time
periods.
Swapping Your World Time and Home
●
Time
1. Y
Tap the "CASIO WATCHES" icon.
2. Y
Perform the operation shown on the
phone screen to swap your Home Time
with your World Time.
For example, if your Home City is Tokyo
and the World Time City is New York, they
will be swapped as shown below.
Before swapping
After swapping
Home City (Tokyo)
Home City (New York)
World Time City
World Time City
(New York)
(Tokyo)
11
Advertisement
Table of Contents
