EMG ELDRO EdEx Series Assembly Manual page 71

ELDRO-EdEx-Montageanleitung-607338-EN.docx
NOTICE
Suitable measures must be taken to prevent the EdEx thrusters
falling before removing them. The EdEx thrusters weigh between
30 and 90 kg.
NOTICE
The lifting rod must not be damaged or contaminated,
e.g. by paint as a result of painting the entire system. A failure to
observe this will destroy the lifting rod.
Process
1. Secure the EdEx thruster to prevent it falling.
2. Pull the bolt out of the lifting rod.
3. Attach the lifting gear to the EdEx thruster.
4. Remove the bolt from the foot hole.
5. Use the lifting gear to remove the EdEx thruster.
Disassembly
Removal 10.3
71 / 75
10