Table of Contents
Advertisement
10
Disassembly
10.1
Safety instructions
ELDRO-EdEx-Montageanleitung-607338-EN.docx
The following safety regulations must be adhered to before beginning
any work on EdEx thrusters:
Ensure that the industrial system is shut down.
Disassembly may only be carried out if no explosive atmosphere
is present.
De-energise the system.
Safeguard the system to prevent it being switched on again.
Test to ensure a de-energised state.
Cover or isolate adjacent live parts.
WARNING
Opening the EdEx thrusters
Risk of injury due to tensioned C-springs.
– Only service partners authorised by the manufacturer are
permitted to dismantle the EdEx thrusters outside the
manufacturer's factory.
CAUTION
Switch-off due to any C-springs, brake springs, brake weights
that may be installed or due to other external influences
Risk of crushing due to the lifting rod
– The downstream drive must be secured before removing the
EdEx thrusters, because the lifting rod retracts automatically.
Disassembly
Safety instructions 10.1
10
69 / 75
Hide quick links:
Advertisement
Table of Contents
